Browse By Category
  • Back to product list

    DUAL NOZZLE CAG

    PRODUCT OVERVIEW

     

    Versatile Spot Cooling for Machining, Repair Shops and More

     

    Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing air as low as -30 deg F (-34 deg C) for numerous industrial spot cooling applications. With no moving parts to wear out, Cold Air Guns require no electricity at the target, just a compressed air source.

     

    Cold Air Guns are most often used for cooling of metal parts, in the machining and repair of metals, plastics, wood, ceramics and other materials. Cold air machining outperforms mist coolants and substantially increases tool life and feed rates on dry machining operations. The effective cooling from a Cold Air Gun can eliminate heat-related parts growth while improving parts tolerance and surface finish quality. Cold Air Guns have adjustable temperature and flow settings; and some models have a frost free nozzle to eliminate mess from frost and condensation. The Dual Point Nozzle is ideal for applications where multi-directional cooling is needed, such as band saw blades, circular saw blades, and drill bits, among others.

     

    BENEFITS

     

    • Increase dry machining speeds up to 36%
    • Extend tool life by 50%
    • Eliminates the mess, expense and safety concerns of using mist coolants
    • Reduce waiting or normalization time by cooling parts faster
    • Eliminate the potential for burning and scorching
    • Avoid secondary parts cleaning after machining
    • Reduce grinding wheel loading caused by overheating
    • Airflow clears sawdust, chips, shavings and dirt away from surface

     

    FEATURES

     

    • Flexible, dual nozzles provide cooling at two points simultaneously
    • Creates cold air up to 100 F deg (38 C deg) below the inlet compressed air temperature
    • Quiet operation; meets OSHA noise specifications
    • Adjustable temperature and flow rate
    • Highly reliable with no moving parts
    • Low pressure outlet air
    • Uses only compressed air – no Freon
    • System includes a magnetic base and a 5 micron auto-drain compressed air filter
    • Magnetic base allows for easy, close in positioning and easy portability

    SPECIFICATIONS

     

    Dual Nozzle Cold Air Gun 612 622 632
    Compressed air pressure (psig) 80 - 100 80 - 100 80 - 100
    Inlet size (NPT pipe thread, inches) 1/4 1/4 1/4
    Minimum Outlet Temperature, deg F
    (at 70 deg F inlet air)
    -10 10 30
    Cooling Capacity (BTU/hr) 900 1500 2500
    Air Consumption @ 100 psig (scfm) 15 25 35
    Outlet Air Flow Rate (scfm) 2 to 15 8 to 25 18 to 35
    Dimensions, inches      
          Overall Length  18 5/8 18 5/8 18 5/8
          Diameter 1 3/4 1 3/4 1 3/4
          Nozzle Length 8 8 8
          Flexible Nozzle Diameter 1 1 1
          Outlet Diameter (ID) 3/8 3/8 3/8
          Magnetic base diameter 3  3/16 3  3/16 3  3/16
          Magnetic base height 4 1/8 4 1/8 4 1/8
    Weight, lbs 3.0 3.0 3.0
    Supply hose      
          Diameter, inch  3/8  3/8  1/2
          Maximum recommended distance, feet 25 15 30
    Recommended filter size 25 scfm 25 scfm 35 scfm
    Filter model* 701S-24A 701S-24A 701S-36A

    *Filter included with Cold Air Gun Systems

    Quote Request

    If you have any questions regarding the products we are offering, pleasee fill out the form below and one of our representavies will contact your shortly. Thank you for your interest in Drive Line!

    Quote Request